RFMW, Ltd. announces design and sales support for a high gain, 10W GaN amplifier targeted at S-band RADAR applications. The TriQuint TGA2583-SM offers 33dB of gain and >50% PAE from 2.7 to 3.7GHz. Saturated output power is rated at 40.5dBm from a 25-32 volt supply providing 175mA. The TGA2583-SM can be operated in CW or pulse mode as the 5x5mm AC-QQFM package provides good thermal management for PCB mounted designs. Complementary to the TGA2583-SM is TriQuint’s higher power TGA2585-SM, an 18W, packaged GaN amplifier.
Author: RFMW
RFMW, Ltd. announces design and sales support for two BAW filters targeting applications where 2.4GHz WLAN, Bluetooth and Wi-FI products must coexist with 4G LTE and TD-LTE signals. TriQuint’s 885062 and 885071 coexistence filters offer high rejection in adjacent LTE bands yet come in an industry-leading small package measuring 1.4×1.2×0.46mm. Small size does not compromise power handling as both the 885062 and 885071 meet a 28dBm average power rating allowing circuit placement immediately following a final power amplifier. With extended temperature performance over -40 to +95 degrees Celsius and hermetically sealed for outdoor application, the 885062 and 885071 are even…
RFMW, Ltd. announces design and sales support for Peregrine Semiconductors’ 10MHz to 8GHz SP4T switch. The PE42441 combines low insertion loss of 1dB with high isolation of 39dB (measured at 6GHz). Internal 50 ohm terminations give this absorptive switch a P0.1dB compression point of 31dB, a significant competitive advantage for target applications in wireless infrastructure and wireless connectivity. Peregrine’s PE42441 high isolation characteristics reduce the need for additional components and the Peregrine UltraCMOS process eliminates the need for DC blocking capacitors thereby reducing overall BOM costs. Available in a 5x5mm QFN, the PE42441 uses 1.8 or 3V control voltages and…
RFMW, Ltd. announces design and sales support for two, DC-3.5GHz power transistors from TriQuint. Available in either a flanged or earless Gemini package as the T1G4020036-FL and T1G4020036-FS respectively, the devices provide two independent 120W paths. Linear gain measures 16dB at 2.9GHz. A low thermal resistance base material supports applications in RADAR, communications and avionics. Both the T1G4020036-FL and T1G4020036-FS run off a 36V supply and offer efficiencies in excess of 50%.
RFMW, Ltd. announces design and sales support for a 100W forward power/20W reverse power, Surface Mount isolator from RFCI. The RFSL5401R covers a 55MHz bandwidth from 1625 to 1680MHz. Typical insertion loss of the RFSL5401R is <0.25dB while isolation is typically >25dB. RFCI SMT isolators are designed for maximum performance yet are competitively priced for both small production runs or high volume requirements. The RFCI RFSL5401R finds applications in satellite data terminals. RFCI has an extremely broad range of surface mount, drop-in and coax isolators and circulators up to Ku band for both low and high power applications.
RFMW, Ltd. announces design and sales support for a 100 to 3,000MHz GaN amplifier offering a saturated output power of 12W. The TriQuint TGA2216 is available as a 1.8×1.8mm DIE and services applications in electronic warfare, communications systems and RADAR. The TGA2216 provides 22dB of small signal gain and 14dB of large signal gain with Power Added Efficiency (PAE) of >40%. For linear applications, P1dB is rated at 34dBm with IM3 at -30dBc. The TGA2216 MMIC allows lower BOM count, reduced board space and higher efficiency than transistor alternatives. TriQuint intends to offer a QFN packaged device in 2014.
RFMW, Ltd. announces design and sales support for the T2G6001528-SG from TriQuint. This wide band, unmatched transistor offers up to 15W P3dB of power from DC to 6GHz. GaN on SiC HEMT enables efficiencies up to 77%. The T2G6001528-SG is offered in a gull wing package, a TriQuint first, for SMT mounting on PCBs. >15dB of gain is available mid-band. Running off a 28V supply, TriQuint’s T2G6001528-SG finds applications in commercial and military radar, communication systems, test instrumentation and wideband amplifier designs.
RFMW, Ltd. announces design and sales support for Sangshin Elecom triplexers targeting avionics applications for Automatic Dependent Surveillance-Broadcast (ADS-B), Universal Access Transceiver (UAT) and Traffic Collision Avoidance System (TCAS). Sangshin’s TPX978/1030/1090SA triplexer offers excellent isolation of 45dB between each band along with only 2.5dB of insertion loss. The TPX978/1030/1090SA can handle 3W of power and is available in a 55mm x 22m x 7mm surface mount package. In addition to the Sangshin TPX978/1030/1090SA triplexer, Sangshin also offers complimentary, single-band filters covering the same bands. The MBP44RC1030S15C, MBP44RC1090S15C, and MBP44RC978S05C are centered at 1030MHz, 1090MHz, and 978MHz respectively. All three filters…
RFMW, Ltd. announces design and sales support for TriQuint’s 30MHz to 2.5GHz TGA2237 with >52% PAE. The TGA2237 offers 10W saturated power with 13dB of large signal gain. P1dB is rated at >32dBm with a small signal gain of 19dB. TriQuint’s TGA2237 operates from a 30V supply and uses only 360mA of current. Broadband performance of this GaN device makes the TriQuint TGA2237 ideal for Radar, communications and electronic warfare applications. Available in DIE for small for factor requirements.
RFMW, Ltd. announces design and sales support for the TGA2576-2-FL from TriQuint. This 2.5 to 6GHz GaN power amplifier provides 40W of saturated output power with power added efficiency (PAE) of 36%. Suitable for EW, Radar, test instrumentation, communications systems or as an EMC amplifier, the TriQuint TGA2576-2-FL operates at 30V and 1.55A from its bias supply. Small signal gain is 29dB while large signal gain is 20dB. For ideal thermal management and handling, the TGA2576-2-FL is offered in a CuW-based flanged package and can operate in both CW and pulsed modes.